Loading Preprinted Paper - Canon imagePRESS C1+ Manual

Loading Preprinted Paper

The side of preprinted paper to be coated (coated surface) differs depending on the
1
paper source into which you load the preprinted paper. To coat the side which has
printing on it, you must load the preprinted paper with correct side up or down. Also,
if you load multiple sheets of preprinted paper, be sure to check how the preprinted
paper is arranged. The following table shows that the combination of coated surface
in each paper source and arrangement of the preprinted paper.
Coated surface
Arrangement
NOTE
If you load two-sided preprinted paper, set front side to coated surface.
Example:
If you load two-sided preprinted paper, load the paper face down.
- If you load multiple sheets of preprinted paper into the paper drawer, arrange them in
- For more information on paper types, see Chapter 2, "Basic Operations," in the
1-8

Loading Preprinted Paper

Paper Drawer
Face down
In page order with
first page on top
page order with first page on top.
Reference Guide.
Paper Source
Stack Bypass Paper Deck-AA1
Face up
In page order with In page order with
first page on top first page on top
Face up