If the desired paper type is not displayed, press [Detailed Settings]
paper type from the list
If you are coating the back side of the paper, press [2nd Side of 2-Sided Page].
NOTE
•
[Transparency] can be selected only if [A4] is selected as the paper size.
•
You can register paper types that are not displayed on the detailed settings list in
[Selecting the Paper Type]. For more information on storing the paper type, see
Chapter 6, "System Manager Settings," in the Reference Guide.
● If you want to select a nonstandard paper size:
❑
Press [Irreg. Size].
❑
Press [X] (horizontal axis)
❑
Press [Y] (vertical axis)
❑
Press [OK].
You can also press a size key in which a paper size is registered ([S1] to [S5]),
instead of entering a value.
NOTE
To recall a paper size from a size key ([S1] to [S5]), it is necessary to register a
paper size in that key beforehand. For instructions on registering a paper size, see
Chapter 4, "Customizing Settings," in the Reference Guide.
➞
press [OK].
➞
enter a value.
➞
enter a value.
Selecting Preprinted Paper (Paper Select)
➞
select the
1
1-13