4
2
2-14
Reserving Jobs
Select the desired paper size and type.
NOTE
•
If you select [Transparency] or [Labels], make sure that you do not specify any
Finishing modes (Collate or Staple).
•
If Stack Bypass Standard Settings in Common Settings (from the Additional
Functions screen) is set to 'On', and the paper size/type have been stored, the
selected paper size/type are displayed on the screen. (See Chapter 4,
"Customizing Settings," in the Reference Guide.)
● If you want to select a standard paper size:
❑
Select the desired paper size
NOTE
To select an inch paper size, press [Inch-size].
❑
Select the desired paper type
If the desired paper type is not displayed, press [Detailed Settings]
the paper type from the list
If you are coating the back side of the paper, press [2nd Side of 2-Sided
Page].
NOTE
•
[Transparency] can be selected only if [A4] is selected as the paper size.
•
You can register paper types that are not displayed on the detailed settings list in
[Selecting the Paper Type]. For more information on storing the paper type, see
Chapter 6, "System Manager Settings," in the Reference Guide.
➞
press [Next].
➞
press [OK].
➞
press [OK].
➞
select