netvox R718PA7 User Manual
  1. Manuals
  2. Brands
  3. netvox Manuals
  4. Accessories
  5. R718PA7
  6. User manual

netvox R718PA7 User Manual

Wireless noise sensor
Hide thumbs Also See for R718PA7:

Advertisement

Table of Contents

R718PA7
Model：
Wireless Noise Sensor
Wireless Noise Sensor
User Manual
Copyright©Netvox Technology Co., Ltd.
This document contains proprietary technical information which is the property of
NETVOX Technology. It shall be maintained in strict confidence and shall not be
disclosed to other parties, in whole or in part, without written permission of NETVOX
Technology. The specifications are subject to change without prior notice.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the R718PA7 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for netvox R718PA7

Summary of Contents for netvox R718PA7

  • Page 1 This document contains proprietary technical information which is the property of NETVOX Technology. It shall be maintained in strict confidence and shall not be disclosed to other parties, in whole or in part, without written permission of NETVOX Technology. The specifications are subject to change without prior notice.

  • Page 2: Table Of Contents

    Table of Content 1. Introduction ........................2 2. Appearance ......................... 3 3. Main Feature ........................3 4. Set up Instruction ....................... 4 5. Data Report ........................5 6. Installation ......................... 7 7. Important Maintenance Instruction ................... 8...

  • Page 3: Introduction

    R718PA7 is a Class A device based on LoRaWAN of NETVOX and is compatible with LoRaWAN protocol.R718PA7 can be connected with a noise sensor (RS485) externally. The noise value collected by the device will be reported to the corresponding gateway.

  • Page 4: Appearance

    2. Appearance Indicator Function Key 3. Main Feature  Adopt SX1276 wireless communication module  DC 12V adapter power supply  Noise detection  The base is attached with a magnet that can be attached to a ferromagnetic material object ...

  • Page 5: Set Up Instruction

    4. Set up Instruction On/Off Power on DC12V adapter DC12V power supply, the green indicator flashing once means turn on Turn on successfully. Press and hold the function key for 5 seconds till green indicator flashes Restore to factory setting 20 times.

  • Page 6: Data Report

    1. The cycle of the device sending the data report is according to the default. 2. R718PA7 reports the noise value. The data parsing reported by the device is referenced by the Netvox LoraWAN Application Command document and http://www.netvox.com.cn:8888/page/index Example of ConfigureCmd FPort：0x07...
  • Page 7 ReportRsp (2bytes Unit: s) (2bytes Unit: s) (5Bytes, Fixed 0x00) (1) Configure R718PA7 device parameters MaxTime = 60s (The MinTime configuration is useless, but it needs to be set greater than 0 because of the software limitation.) Downlink: 0157000A003C0000000000 Device returns:...

  • Page 8: Installation

    6. Installation 1. R718PA7 has a built-in magnet (as the figure 2. The device periodically reports the data below). It can be attached to the surface of an iron according to Max Time. The default Max object conveniently and quickly when it is installed.

  • Page 9: Important Maintenance Instruction

    7. Important Maintenance Instruction Kindly pay attention to the following in order to achieve the best maintenance of the product: • Keep the equipment dry. Rain, moisture and various liquids or water may contain minerals that can corrode electronic circuits. In case the device is wet, please dry it completely. •...

Table of Contents