Alfa Network AWAP05O User Manual page 93

• b only: Both 802.11b and 802.11g clients can communicate with the access point,
but 802.11g clients can only transfer data at 802.11b standard rates (up to
11 Mbps).
Maximum Station Data Rate – The maximum data rate at which the access
point transmits unicast packets on the wireless interface. The maximum
transmission distance is affected by the data rate. The lower the data rate,
the longer the transmission distance. (Default: 54 Mbps)
For a description of the remaining configuration items, see "Radio Settings
(802.11a)" on page 6-38.
CLI Commands for the 802.11g Wireless Interface – From the global
configuration mode, enter the interface wireless g command to access the
802.11g radio interface. Set the interface SSID using the ssid command
and, if required, configure a name for the interface using the description
command. You can also use the closed-system command to stop sending
the SSID in beacon messages. Select a radio channel or set selection to Auto using
the channel command. Set any other parameters as required. To view the current
802.11g radio settings, use the show interface wireless g command.
DUAL OUTDOOR(config)#interface wireless g
Enter Wireless configuration commands, one per line.
DUAL OUTDOOR(if-wireless g)#description RD-AP#3
DUAL OUTDOOR(if-wireless g)#ssid r&d
DUAL OUTDOOR(if-wireless g)#channel auto
DUAL OUTDOOR(if-wireless a)#closed-system
DUAL OUTDOOR(if-wireless a)#transmit-power full
DUAL OUTDOOR(if-wireless g)#speed 6
DUAL OUTDOOR(if-wireless g)#max-association 32
DUAL OUTDOOR(if-wireless g)#beacon-interval 150
DUAL OUTDOOR(if-wireless g)#dtim-period 5
DUAL OUTDOOR(if-wireless g)#fragmentation-length 512
DUAL OUTDOOR(if-wireless g)#rts-threshold 256
DUAL OUTDOOR(if-wireless g)#exit
6
Radio Interface
7-66
7-66
7-67
7-68
7-67
7-72
7-68
7-73
7-69
7-70
7-71
7-71
6-43