7
Command Line Interface
Command Mode
Global Configuration
Command Usage
The logging process controls error messages saved to memory. You can use
the logging level command to control the type of error messages that are
stored in memory.
Example
Outdoor Bridge(config)#logging on
Outdoor Bridge(config)#
logging host
This command specifies a syslog server host that will receive logging messages.
Use the no form to remove syslog server host.
Syntax
logging host <host_name | host_ip_address>
no logging host
• host_name - The name of a syslog server.
(Range: 1-20 characters)
• host_ip_address - The IP address of a syslog server.
Default Setting
None
Command Mode
Global Configuration
Example
Outdoor Bridge(config)#logging host 10.1.0.3
Outdoor Bridge(config)#
logging console
This command initiates logging of error messages to the console. Use the no form
to disable logging to the console.
Syntax
logging console
no logging console
Default Setting
Disabled
Command Mode
Global Configuration
7-16