Alfa Network AWAP05O User Manual page 78

Dual-band outdoor access point / bridge
Table of Contents

Advertisement

6
System Configuration
indicate the number of hours your time zone is located before (east) or after (west)
UTC.
Enable Daylight Saving – The wireless bridge provides a way to automatically adjust
the system clock for Daylight Savings Time changes. To use this feature you must
define the month and date to begin and to end the change from standard time.
During this period the system clock is set back by one hour.
CLI Commands for SNTP – To enable SNTP support on the wireless bridge, from
the global configuration mode specify SNTP server IP addresses using the
command, then use the
sntp-server ip
service. Use the
sntp-server timezone
the
sntp-server daylight-saving
current SNTP settings, use the
DUAL OUTDOOR(config)#sntp-server ip 10.1.0.19
DUAL OUTDOOR(config)#sntp-server enable
DUAL OUTDOOR(config)#sntp-server timezone +8
DUAL OUTDOOR(config)#sntp-server daylight-saving
Enter Daylight saving from which month<1-12>: 3
and which day<1-31>: 31
Enter Daylight saving end to which month<1-12>: 10
and which day<1-31>: 31
DUAL OUTDOOR(config)#exit
DUAL OUTDOOR#show sntp
SNTP Information
=========================================================
Service State
SNTP (server 1) IP
SNTP (server 2) IP
Current Time
Time Zone
Daylight Saving
=========================================================
DUAL OUTDOOR#
CLI Commands for the System Clock – The following example shows how to
manually set the system time when SNTP server support is disabled on the wireless
bridge.
DUAL OUTDOOR(config)#no sntp-server enable
DUAL OUTDOOR(config)#sntp-server date-time
Enter Year<1970-2100>: 2003
Enter Month<1-12>: 10
Enter Day<1-31>: 10
Enter Hour<0-23>: 18
Enter Min<0-59>: 35
DUAL OUTDOOR(config)#
6-28
sntp-server enable
command to set the location time zone and
command to set up a daylight saving. To view the
command.
show sntp
: Enabled
: 137.92.140.80
: 192.43.244.18
: 19 : 35, Oct 10th, 2003
: +8 (TAIPEI, BEIJING)
: Enabled, from Mar, 31th to Oct, 31th
command to enable the
7-19
7-19
7-21
7-21
7-22
7-19
7-20

Advertisement

Table of Contents
loading

This manual is also suitable for:

Awap05om

Table of Contents