Alfa Network AWAP05O User Manual page 149

Command
802.1x session-timeout
address filter default
address filter entry
address filter delete
mac-authentication server
mac-authentication
session-timeout
show authentication
802.1x
This command configures 802.1x as optionally supported or as required for wireless
clients. Use the no form to disable 802.1x support.
Syntax
802.1x <supported | required>
no 802.1x
• supported - Authenticates clients that initiate the 802.1x authentication
process. Uses standard 802.11 authentication for all others.
• required - Requires 802.1x authentication for all clients.
Default Setting
Disabled
Command Mode
Global Configuration
Command Usage
• When 802.1x is disabled, the access point does not support 802.1x
authentication for any station. After successful 802.11 association, each
client is allowed to access the network.
• When 802.1x is supported, the access point supports 802.1x authentication
only for clients initiating the 802.1x authentication process (i.e., the access
point does NOT initiate 802.1x authentication). For stations initiating
802.1x, only those stations successfully authenticated are allowed to
access the network. For those stations not initiating 802.1x, access to the
network is allowed after successful 802.11 association.
• When 802.1x is required, the access point enforces 802.1x authentication
for all 802.11 associated stations. If 802.1x authentication is not initiated by
the station, the access point will initiate authentication. Only those stations
successfully authenticated with 802.1x are allowed to access the network.
• 802.1x does not apply to the 10/100Base-TX port.
Function
Sets the timeout after which a connected client must be
re-authenticated
Sets filtering to allow or deny listed addresses
Enters a MAC address in the filter table
Removes a MAC address from the filter table
Sets address filtering to be performed with local or remote
options
Sets the interval at which associated clients will be
re-authenticated with the RADIUS server authentication
database
Shows all 802.1x authentication settings, as well as the
address filter table
7
Authentication
Mode Page
GC
7-37
GC
7-37
GC
7-38
GC
7-38
GC
7-39
GC
7-40
Exec
7-40
7-35