Alfa Network AWAP601HW Specifications

AWAP601HW
802.11g/b Wireless LAN PoE Access Point
1W High-Power
IEEE 802.11g/b Wireless LAN Access Point
Acting as a bridge between the wired Ethernet and the 2.4GHz IEEE 802.11g/b wireless LAN,
this wireless LAN access point can let your wireless LAN client stations access both the wired
and the wireless network nodes.
WDS Bridge Mode (Repeater Mode)
The WDS (Wireless Distributed System) function lets this access point act as an wireless LAN
access point and repeater at the same time. Users can use this feature to build up a large
wireless network in a large space like airports, hotels and schools ...etc. This feature is also
useful when users want to bridge networks between buildings where it is impossible to deploy
network cable connections between these buildings.
Station Mode (AP Client Mode)
By setting this access point into station mode and connecting to a network device's Ethernet
port, it can let a network device that originally only supports wired Ethernet access the wireless
LAN easily without changing any configuration.
Robust Wireless LAN Security
Except for the basic security control by using ESSID and 64/128 bit key length WEP
encryption, this access point also supports the advanced security features, like MAC access
control and hide ESSID. It provides a total solution for you to build up a secure wireless LAN
network environment that can prevent from all kinds of hacker intrusion.
RP-SMA Detachable Antenna
This access point provides a standard RP-SMA antenna connector that can let you apply all
kinds of high gain antennas. This can help you enlarge your wireless LAN coverage.
Web Configuration
You can configure this access point through the friendly Web user interface with a browser.