Table of Contents
Advertisement
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Alfa Network AWAP601HW
Summary of Contents for Alfa Network AWAP601HW
-
Page 1: Installation Guide
AWAP601HW Installation Guide Version 1.1.3 (6/13/2006) -
Page 2: Table Of Contents
Content： Installation...4 Package list ...4 Hardware Installation...4 How to Start ...5 Before start to configure ...5 What the AWAP601HW acts ...5 2.2.1 Access Point...5 2.2.2 Client...5 2.2.3 WDS...5 2.2.4 WDS +AP ...5 2.2.5 AP+Repeater ...5 Configuration ...6 Configure AP by Wizard ...6 3.1.1... - Page 3 3.2.6 Security Configuration...16 3.2.6.1 Set WEP, at Security page...16 3.2.6.2 Set WEP, 802.1x authentication...17 3.2.6.3 Set WPA, At Security page ...17 3.2.6.4 Set WPA, At Security page ...18 3.2.6.5 Set WPA2, At Security page ...18 3.2.6.6 Set WPA2, At Security page ...19 3.2.6.7 Set WPA2 mixed, At Security page ...19 3.2.7 Access Control ...20...
-
Page 4: Installation
1 Installation 1.1 Package list ◎ AWAP601HW × 1 ◎ Power Adapter (Input：100~240V Output：18V 1.0A) × 1 ◎ RJ45 cable × 1 ◎ 2dBi Antenna × 1 ◎ APOE02 Passive power over Ethernet X 1 1.2 Hardware Installation... -
Page 5: How To Start
An Access Point is a specially configured node on a wireless network that bridges the wireless LAN and a wired LAN. 2.2.2 Client Client mode allows AWAP601HW connect to AP. Attach wireless ability to personal computer or laptop by connecting Ethernet port directly. -
Page 6: Configuration
3 Configuration 3.1 Configure AP by Wizard 3.1.1 Open configuration page http://192.168.1.250， It will pop out a dialogue window. Default user name is 3.1.2 After password check, wizard will be executed. admin and password is 12345 User name：admin Password：12345 Click Next page... -
Page 7: Lan Interface Setup
3.1.3 LAN Interface Setup 1.Set IP Address and Subnet Mask Cancel will back to start page of wizard 3.1.4 Wireless Basic Setting Set AP go Set Client go Set WDS go Set WDS+AP go Back to previous page 2.Click to Next page 3.1.4.1 3.1.4.2 3.1.4.3... -
Page 8: Ap Setting
3.1.4.1 AP setting 1.Select B or G mode or Mixed 4.Select Channel 3.1.4.2 Client Setting 1.Select B or G mode or Mixed 4.Select this function to change MAC address of client. Refer to TCP/IP setting 2.Select AP mode 3.Set SSID 5.Click Next to 3.1.5 2.Select Client mode... -
Page 9: Wds Setting
1.Select B or G mode or Mixed 2.Select WDS mode 3.Set Channel PS. This step just change the operation mode of AWAP601HW, the WDS setup is not completed. For more details, please read WDS configuration 3.1.4.4 WDS+AP Setting 1.Select B or G mode or Mixed 2.Select WDS+AP mode... -
Page 10: Wireless Security Setup
3.1.5 Wireless Security Setup 1.none security 2.WEP go 3.1.5.1 3.WPA(TKIP) go 3.1.5.2 4.WPA2(AES) go 3.1.5.3 5.WPA2 Mixed go 3.1.5.4 3.1.5.1 Security (WEP) 3.Select a key 4.Type in the field from key to key field key1 to key4 1.Select 64bits or 128 bits key length 2. -
Page 11: Security Wpa(Tkip)
3.1.5.2 Security WPA(TKIP) 1.Select Passphrase 2.Type in a string of characters into Pre-Shared key field 1.Select Hex(64 characters) 2.Type in 64 hex characters into Pre-Share key field 3.1.5.3 Security WPA2 (AES) 1.Select Passphrase 2.Type in a string of characters into Pre-Shared key field 1.Select Hex(64 characters) 2.Type in 64 hex characters into Pre-Share key field... -
Page 12: Security Wpa2 (Mixed)
3.1.5.4 Security WPA2 (Mixed) 1.Select Hex(64 characters) 2.Type in 64 hex characters into Pre-Share key field 3.1.6 Finish 1.Select Passphrase 2.Type in a string of characters into Pre-Shared key field... -
Page 13: Configure Manually
3.2 Configure manually 3.2.1 AP Configuration Here describes how to setup AP without security setting. To setup AP with security, please read 3.3.3. At Basic Setting page： 5. Apply 3.2.2 Client Configuration Notice：Step 3. Infrastructure is for connecting AP and Ad hoc is for Use Site Survey (3.3.3) to scan and connect to AP At Basic Setting page：... -
Page 14: Ap+Repeater Configuration
3.2.3 AP+Repeater Configuration The step 1~4 is the same as AP setting. At Basic Setting page： 3.2.4 WDS Configuration At least a pair of AP for setting WDS mode Step 1.At Basic Setting page： 4. Apply 5.Select enable Universal Repeater Mode 6.Set SSID of extended AP 1.Select WDS 2.Select Channel... -
Page 15: Wds+Ap Configure
Step 2. At WDS setting 3.After apply, the WDS’s MAC will list at here. To remove it by delete MAC 3.2.5 WDS+AP Configure It combines WDS and AP function together. Step 1. At Basic Setting page： 1.Select AP+WDS Also supports repeater mode 1.Select Enable WDS 2.Add other WDS’s MAC here... -
Page 16: Security Configuration
Step 2. At WDS Setting page： 1.Select Enable WDS 3.After apply, the WDS’s MAC will list at here. To remove it by delete MAC 3.2.6 Security Configuration 3.2.6.1 Set WEP, at Security page 1.Select WEP 2.Add other WDS’s MAC here Click Set WEP key will pop out a key setup windows... -
Page 17: Set Wep, 802.1X Authentication
3.2.6.2 Set WEP, 802.1x authentication 1.Select WEP 3.2.6.3 Set WPA, At Security page 1.select RADIUS 2.Select 802.1x Authentication, if there is a RADIUS server in network. 3.Type in RADIUS server IP address and port number. 2.Cipher suite can choose TKIP/AES or both... -
Page 18: Set Wpa, At Security Page
3.2.6.4 Set WPA, At Security page 3.2.6.5 Set WPA2, At Security page 1.Select RADIUS 3.Enable Pre-authentication or not 1.Select pre-share key 2.Cipher suite can choose TKIP/AES or both 3.Select passphrase/Hex(64 characters) and set key to Pre-Shared key field 2.Cipher suite can choose TKIP/AES or both 4.Type in RADIUS server IP address... -
Page 19: Set Wpa2, At Security Page
3.2.6.6 Set WPA2, At Security page 3.2.6.7 Set WPA2 mixed, At Security page 1.Select RADIUS 3.Enable Pre-authentication or not 1.Select Pre-share key 2.Cipher suite can choose TKIP/AES or both 3.Select passphrase/Hex(64 characters) and set key to Pre-Shared key field 2.select TKIP/AES or both in WPA or WPA2 4.Type in RADIUS server IP address... -
Page 20: Access Control
3.2.7 Access Control At Access Control page 3.2.8 Easy Config EasyConfig only works in a pair of AWAP601HW It automatically setup two devices to AP and AP client. There are two methods to setup (button/Q&A) 3.2.8.1 Button mode 1.Enable EasyConfig 3. -
Page 21: Q&A Mode
3.2.8.2 Q&A mode The follow setting is only for AP client. In AP only need set allow Q&A or button+Q&A. 3. After setup AP and AP client in both side. Press the button of AP till LED sparkling. Then press the button of AP client till LED sparkling. After a period of time, AP client will set SSID, security and connect to AP automatically 3.2.9 TCP/IP... -
Page 22: System Tools
4 System Tools 4.1 Status Get system status by reading this page 4.2 Log Select Enable log Select log system all or wireless Enable remote log And set log server IP address... -
Page 23: Statistic
4.3 Statistic Report the TX/RX package of Wireless and Ethernet 4.4 Upgrade Firmware... -
Page 24: Save/Reload Setting
4.5 Save/Reload Setting Save current setting to file as backup Reload to default setting 4.6 Password Reload backup file Setup username and password... -
Page 25: Hardware Reset/Reload Default
4.7 Hardware Reset/Reload default Reset：Press the reset button till the reset light is shining, then release the button quickly. The system will reboot. Reload：Press the reset button and notice the change of reset light. After the reset light from dark to bright and returns to dark, release the reset button.
Need help?
Do you have a question about the AWAP601HW and is the answer not in the manual?
Questions and answers