Table of Contents
Advertisement
6
System Configuration
Enabling System Logging
The wireless bridge supports a logging process that can control error messages
saved to memory or sent to a Syslog server. The logged messages serve as a
valuable tool for isolating wireless bridge and network problems.
System Log Setup – Enables the logging of error messages.
Logging Host – Enables the sending of log messages to a Syslog server host.
Server Name/IP – The IP address or name of a Syslog server.
Logging Console – Enables the logging of error messages to the console.
Logging Level – Sets the minimum severity level for event logging.
The system allows you to limit the messages that are logged by specifying a
minimum severity level. The following table lists the error message levels from the
most severe (Emergency) to least severe (Debug). The message levels that are
logged include the specified minimum level up to the Emergency level.
Error Level
Emergency
Alert
Critical
Error
Warning
Notice
Informational
Debug
The wireless bridge error log can be viewed using the Event Logs window in
Note:
the Status section (page 6-64).The Event Logs window displays the last 128
messages logged in chronological order, from the newest to the oldest. Log
messages saved in the wireless bridge's memory are erased when the
device is rebooted.
CLI Commands for System Logging – To enable logging on the wireless bridge, use
the
command from the global configuration mode. The
logging on
command sets the minimum level of message to log. Use the
command to enable logging to the console. Use the
specify up to four Syslog servers. The CLI also allows the
6-26
Description
System unusable
Immediate action needed
Critical conditions (e.g., memory allocation, or free memory error - resource
exhausted)
Error conditions (e.g., invalid input, default used)
Warning conditions (e.g., return false, unexpected return)
Normal but significant condition, such as cold start
Informational messages only
Debugging messages
logging level
logging console
command to
logging host
logging facility-type
Advertisement
Table of Contents
