Basic Setting] Menu; Basic Setting] Window - Furuno FMD-3100 Instruction Manual

1. INITIAL SETTINGS AND ADJUSTMENTS
Tab bar menu item
[Basic setting]
[Own Ship Setting]
[Installation parameters]
[CCRS]
[TCS]
[AMS]
[Alert Define List]
[Data Sharing]*
[Save and Sync]
[System Monitor]
[Software Update]
[Factory Test and Default]
[Conning]
*: Does not require adjustment.
1.2

[Basic Setting] Menu

1.2.1

[Basic Setting] window

1. Access the [Common Installation Setting] menu, then click [Basic Setting] on the
tab bar.
2. Select the [Equipment ID] from the drop-down list (setting range: [ECD001] to
[ECD016]).
The [Equipment Name], [Equipment Type No.], and [IP Address] are automatically
entered according to the Equipment ID. For details, see the Equipment ID list at
the back of this manual.
Note 1: For the first ECDIS, set [Equipment ID] to "ECD001".
Note 2: Assign a different [Equipment ID] to each unit in the network.
1-4
Sets the equipment ID, monitor, printer and own ship
information.
Enters the ship's parameters and sensor positions.
Sets the system configuration and input/output data.
Sets the priority of the sensors and NMEA sentences.
Not used for FMD-3100.
Sets the AMS and relevant settings.
Sets the alerts.
Sets the interlocking system between units.
Saves and synchronizes the settings. Settings can also be
saved to a removable medium.
Confirms the system condition.
Updates the software.
Performs the factory test or restores default settings.
Configures the mini-conning display.
Description