Furuno FMD-3100 Instruction Manual page 103

6. Enter the IP address as follows, then click the [SET] button.
• No.1 RCB: 192.168.031.111 (Default setting)
• No.2 RCB: 192.168.031.112
7. Click the [CLOSE] button.
8. Run the IP address setting tool (IPSetting.exe) on the PC again, then the IP address entered
at step 6 appears in the [RCB-002 IP Setting] window.
Note: If the IP address setting is not applied, reboot the RCB-002 and PC, then retry step 4
to step 8.
APPENDIX 3 RCB-002 IP ADDRESS SETTING
• No.3 RCB: 192.168.031.113
• No.4 RCB: 192.168.031.114
AP-5