Advertisement
Quick Links
ELECTRONIC
VERTICAL FLOW METERS
MODELS VF28D, VF30D, and VF32D
OPERATION AND MAINTENANCE MANUAL
*MODEL FC101 FLOWCOM REGISTER INDICATOR-TOTALIZER
* ONE PIECE SEPARATOR/SPINDLE AND THREADED REVERSE THRUST BEARING CARTRIDGE
VISIT OUR WEBSITE:
4"-20"
PARTS LIST
FEATURING:
*CERAMIC BEARING CARTRIDGE PROPELLER
3255 WEST STETSON AVENUE
HEMET, CALIFORNIA 92545 U.S.A.
PHONE:
951-652-6811
FAX:
951-652-3078
www.mccrometer.com
E-MAIL:
info@mccrometer.com
1
30119-21
Rev. 4.6/07-09
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for McCrometer Water Specialties VF28D
Summary of Contents for McCrometer Water Specialties VF28D
- Page 1 PARTS LIST FEATURING: *MODEL FC101 FLOWCOM REGISTER INDICATOR-TOTALIZER *CERAMIC BEARING CARTRIDGE PROPELLER * ONE PIECE SEPARATOR/SPINDLE AND THREADED REVERSE THRUST BEARING CARTRIDGE 3255 WEST STETSON AVENUE HEMET, CALIFORNIA 92545 U.S.A. PHONE: 951-652-6811 FAX: 951-652-3078 VISIT OUR WEBSITE: www.mccrometer.com E-MAIL: info@mccrometer.com...
-
Page 2: Warranty
State of California. Copyright © 2000-2007 McCrometer. All printed material should not be changed or altered without permission of McCrometer. The published technical data and instructions are subject to change without notice. Contact your McCrometer representative for current technical data and instructions. - Page 3 I. UNCRATING. When uncrating the meter, any damage UNCRATING due to rough or improper handling should be reported to the transportation firm and McCrometer. If for INSTALLATION any reason it is determined that the unit or parts of 1. Model VF28D & VF32D the unit should be returned to the factory, please 2.
- Page 4 30119-21 Rev. 4.6/07-09 Routine preventative maintenance should be performed spindle (#12). The propeller assembly with reverse on all meters, which includes cleaning and an inspec- flow cartridge will now slide off the spindle. tion of the propeller and its bearing. The intervals between inspections depend on the water quality and WARNING: If the reverse thrust cartridge does not the usage of the meter.
- Page 5 30119-21 Rev. 4.6/07-09 to be sure the set screw is not binding on the thread. Be careful not to cross-thread the reverse thrust bearing SENSOR HOUSING should be removed only if replacement is necessary. It can be taken out of cartridge.
- Page 6 If it is determined that the meter should be returned for repair, please notify McCrometer prior to shipment. Each meter must be properly packaged to prevent damage to the meter in shipment.
-
Page 7: Installation
30119-21 Rev. 4.6/07-09 PROPELLER METER TROUBLESHOOTING FLOW CHART METER NOT READING ACCURATELY CORRECT IS FLOW RATE ABOVE MINIMUM REQUIRED FOR METER? PROBLEM CORRECT IS THERE A FULL PIPE OF WATER? INSTALLATION DOES METER HAVE THE REQUIRED UPSTREAM and DOWNSTREAM STRAIGHT RUNS OF PIPE? CORRECT METER METER... - Page 8 30119-21 Rev. 4.6/07-09 4”-20” ELECTRONIC VERTICAL FLOW METERS MODELS VF28D, VF30D & VF32D PARTS LIST Part Number Description none 7-VF28-D-* Vertical Upfl ow Meter Head Assembly none 7-VF30-D-* Vertical Upfl ow Meter Head Assembly none 7-VF32-D-* Vertical Flow Meter Head Assembly 5-2425-‡-PT Propeller Assembly (Items 2 thru 8) 3-2425-‡-P...
- Page 9 30119-21 Rev. 4.6/07-09 4”-20” ELECTRONIC VERTICAL FLOW METERS MODELS VF28D, VF30D and VF32D *FC101 DIGITAL INDICATOR-TOTALIZER *CERAMIC BEARING CARTRIDGE PROPELLER *ONE PIECE SEPARATOR/SPINDLE and THREADED REVERSE THRUST BEARING CARTRIDGE References to 23-29 not used.
- Page 10 30119-21 Rev. 4.6/07-09 WARNING: BEFORE REMOVING THE METER HEAD FROM THE PIPELINE THE WATER MUST BE TURNED OFF AND PRESSURE MUST BE RELIEVED FROM THE LINE. SERIOUS INJURY CAN RESULT FROM REMOVING A METER HEAD UNDER PRESSURE.
Need help?
Do you have a question about the Water Specialties VF28D and is the answer not in the manual?
Questions and answers