Table of Contents
Advertisement
4-3. Error Logger Display Mode (M2)
4-3-1. Outline
4-3. Error Logger Display Mode (M2)
4-3-1. Outline
This unit has an error log function that records the error
generated or detected in this unit.
The error logger display mode is used to superimpose the
contents (data) of the error log on the video monitor. The
ordinary display mode (refer to Section 4-3-2) and the
setting mode (refer to Section 4-3-3) that displays the
menu to limit the error log display are available in this
unit.
The calendar/clock date incorporated into this unit can be
set in the setting mode.
Error Log
The recorded error log is classified into two categories:
TAPE ERROR and CONDITION. (The error log belongs
to the two types.)
Each log is constituted by a message, error generation date,
and time code.
The message varies depending on the type of a log.
The error generation date is the date based on the calendar
and clock of this unit. (The year is omitted.)
The time code records the time code (LTC) data that is
stored in this unit at the error occurs.
The maximum number of stored log is 300. If the number
of log exceeds 300, the contents of oldest error log is
erased sequentially.
4-56
TAPE ERROR
An error code and error message are recorded as a message
when the error (error codes 01 to 99) occurs.
When multiple sub-error messages are displayed, the three
sub-error messages from the top are recorded.
For the error message, refer to Section 3.
CONDITION
The condition logs below are recorded in an error log.
. VIDEO PB CONDITION RED
This message is recorded when the channel condition
becomes red during video PB operation.
. AUDIO PB CONDITION RED
This message is recorded when the channel condition
becomes red during audio PB operation.
DNW-A22/A22P
Advertisement
Table of Contents
