Rear Panel Block-1; Rear Panel Block-1 - Sony Walkman NW-ZX505 Service Manual

NW-ZX505/ZX507
2-3.

REAR PANEL BLOCK-1

• Continued on 2-4 (page 27).
< Preparation 1. Preparing a clip >
1 Prepare a clip (diameter 0.8 mm) and bend
it to the shape as shown below.
2 Hold the prepared clip as shown below.
bottom side
Note 2: Release the locks of the rear panel springs
in the order of A , B , C , then D .
26
< Preparation 2. Protecting the edges of the cabinet with protection sheets >
Prepare the protection sheets and affix them to four places on the cabinet assy.
– Right view –
1 two screws
(P1.4 5)
2 two screws M1.4
(L = 5.0 mm)
top side
front side
rear panel spring B
Paste near the rear
protection
panel spring.
sheet
Paste near the rear
panel spring.
3 Insert the prepared clip into
the rear panel spring hole.
Note 1: Take care not to touch
the edges of the cabinet.
prepared
clip
rear panel spring hole
rear panel spring A
rear panel spring D
Sony CONFIDENTIAL
For Authorized Servicer
Paste near the rear
panel spring.
– Rear view – – Left view –
Paste near the rear
panel spring.
4 Press the prepared clip
in the direction of the
arrow to release the lock.
protection
sheet
rear panel spring C
Continued on next page.
protection
sheet
SYS SET