Signal Inputs And Outputs - Sony DNW-A22 Maintenance Manual

1-8. Signal Inputs and Outputs

1-8. Signal Inputs and Outputs
AC IN
BREAKER
Communication connectors
1 RS-232C
Output connectors
2 MONITOR OUTPUT
3 VIDEO OUTPUT, COMPOSITE
4 RF ADAPTOR
PHONE
(Upper control panel)
1-10
3
RF ADAPTOR
VIDEO OUTPUT
1 COMPOSITE
VIDEO
2 (SUPER)
DC
AUDIO
MONITOR OUTPUT
R L
2
D-SUB 25P connector (RS-232C interface)
for ISR (Interactive Status Reporting)
XLR 3-pin x 2 (1 set : R and L)
Analog audio
+4 dBm (Standard) (600 Z load), low impedance, balanced
BNC x 2 (including 1 for character superimpose)
Analog composite video 1.0 V p-p, 75 Z, sync negative
VIDEO : RCA jack, 1.0 V p-p, 75 Z, sync negative (for character superimpose)
DC : 5 V
AUDIO : RCA jack, _10 dBu, high impedance, unbalance
JM-60 stereo phone jack
Analog audio
Up to _12 dBu (8 Z, load), unbalance
4
RS-232C
1
DNW-A22/A22P