Viavi SmartClass MPOLS-84 Operating Manual page 95

NOTE:
MPOLx-84/85 (P)
Managing test results
To select/deselect a test result:
There are several ways to select and deselect test results:
1. Tap an entry once to highlight it, tap it again to select it.
2. Use the up/down arrows to highlight an entry and press the
center key to select it.
[A]
3. Press the key and tap the [Select All]button to select all.
[A]
4. Press the key and tap the [Deselect
all.
The selection state of the highlighted entry toggles. The check
mark in the first column shows in light grey when an entry is
deselected and in dark grey when it is selected.
To view test results in full screen:
The measurement data overview is displayed.
I
1. Select one or more test results from the list.
[A]
2. Press the key and tap the [View
The first selected result will be displayed.
[A]
3. Press the key and tap the
display other results.
To sort the test results:
The measurement data overview is displayed.
I
[A]
1. Press the key.
2. Tap the [More] button, then tap the [Sort
3. Select the desired sorting order.
To show or hide the overview columns:
The measurement data overview is displayed.
I
[A]
1. Press the key.
2. Tap the [More] button, then tap the [Show
3. Tap any column header to toggle its hide/show status.
To delete stored results from a project:
The measurement data overview is displayed.
I
1. Select one or more test results.
[A]
2. Press the key.
3. Tap the [Delete Selected]
The selected test results are deleted.
11 D
D P
ATA MANAGEMENT OF ROBE AND
All] button to deselect
Selected]
[Next] or [Previous]
Order]
Columns]
button.
M
ATA ANAGEMENT
PCM
TESTS
button.
button to
button.
buttons.
95