Viavi SmartClass MPOLS-84 Operating Manual page 53

MPOLx-84/85 (P)
Fig. 13 One jumper cable reference method
Fig. 14 Three jumper cable reference method
3. Establish proper cabling according to your settings.
If you have changed the referencing method:
If you have changed the referencing method you must reference
before you can start a measurement. In this case you can start
referencing from the measurement display.
In the Loss/Length measurement display tap the referencing
J
button (1).
To repeat referencing with the same referencing method:
In this case you start referencing from the menu.
1. In the Loss/Length main menu press the
[Set Reference].
6 L /L T O
OSS ENGTH EST PERATION
R
EFERENCING
1
[A]
key and select
53