Viavi SmartClass MPOLS-84 Operating Manual page 17

MPOLx-84/85 (P)
Recovery following storage/shipping
Condensation can occur if an instrument that is stored or
shipped at a low temperature is brought into a warm room. To
prevent damage, wait until no more condensation is visible on
the surface of the instrument before powering it up. Do not
operate the instrument until it has reached its specified
temperature range and wait until it has cooled down if the
instrument was stored at a high temperature (see
"Specifications" on page
Instrument overview
1
2
Fig. 1 Front view MPOLS-85P (left) and MPOLS-85
1 Patch cord microscope (PCM) with FMAE adapter
2 PCM controls: focus control, automated Pass/Fail analysis,
magnification control
3 Connector interface
4 Test head cover (green for APC- and gray for PC connectors)
5 3.5 inch touchscreen
6 Key pad (operator control panel)
7 Battery compartment and stand (on rear of instrument)
U
NPACKING THE INSTRUMENT
105).
3 G S
ETTING TARTED
3
4
5
6
7
8
9
10
17