Viavi SmartClass MPOLS-84 Operating Manual page 19

NOTE:
MPOLx-84/85 (P)
1 Ethernet port (RJ-45)
2 External power supply connector
3 2 USB 2.0 host ports (Type A)
4 USB 2.0 device port (Type Micro-B)
Power supply
The following power sources can be used to operate the
MPOLx-84/85 (P) / MPOLx-85P:
• Eight 1.5 V dry batteries
(Mignon AA size, alkaline type recommended)
• Eight 1.2 V NiMH rechargeable batteries
(Mignon AA size, no internal charge)
• PS4 Universal AC/DC Power Supply (optional)
• RBP2 Li-Ion Battery Pack (optional)
Best Measurement accuracy is achieved when the measurements
are performed in battery mode (w/o AC adapter).
Battery operation
WARNING
Dangers when handling batteries
Handling batteries may be dangerous. Please note the fol-
lowing safety instructions.
Please note the battery operation safety information in the
J
chapter "Battery operation" on page
Replacing batteries
Do not replace individual batteries. Always change all eight
J
batteries at the same time.
Always use eight batteries of the same type; i.e. do not mix
J
rechargeable and non-rechargeable batteries.
3 G S
ETTING TARTED
U
NPACKING THE INSTRUMENT
14.
19