Viavi SmartClass MPOLS-84 Operating Manual page 64

6 L /L T O
OSS ENGTH EST PERATION
S
AVING TEST RESULTS
NOTE:
64
1 Label as defined in the test configuration.
Tap pen to edit label.
J
2 Shows selected project. Results will be saved to this project.
3 • Probe: Number of already saved probe results.
• Powermeter: Number of already saved powermeter results.
• PCM: Number of already saved PCM results.
• Loss/Length: Number of already saved loss/length results.
4 Decrease / increase label ID
5 Save results
2. Tap the pen in the
will be appended automatically, if not already provided by the
user.
3. Tap the [Increment
the label number, if needed.
[G]
4. Press the key again or tap the
The measurement is stored.
If the label ID is not changed, the data set will be saved under the
same title. Then the Data can be distinguished by the Timestamp.
[Label] field to type a new label. A number
ID] or the [Decrement
[Save]
ID] button to adjust
button.
MPOLx-84/85 (P)