Viavi SmartClass MPOLS-84 Operating Manual page 58

6 L /L T O
OSS ENGTH EST PERATION
R
EFERENCING AND RUNNING A TEST WITH
58
24
FIBER CABLING
– or –
[A]
Press the key and tap the [Auto
The display informs about the progress.
6. To view results go to
Referencing and testing the second 12 fibers
1. After a successful referencing and testing the first 12 fibers
connect the second 12 fibers using the two Y-adapter cables
and the 24 pol. Test Reference Cord (TRC). Connect plug 2 to
device A and plug 1 to device B.
2
A
2. In the Loss/Length main menu press the
SET REFERENCE.
The display informs about the progress. A short message reports
if the referencing was successfully. Your are then requested to
connect the test cord.
3. After successfully referencing replace the TRC with the fiber
under test (DUT).
2
A
Test]
"Viewing test results" on page
TRC
DUT
button.
60.
1
B
[A]
key and select
1
B
MPOLx-84/85 (P)