Viavi SmartClass MPOLS-84 Operating Manual page 49

NOTE:
MPOLx-84/85 (P)
The available test profiles are displayed.
2. To highlight a test configuration tap it once.
– or –
Use the arrow keys.
3. Tap the button.
– or –
[A]
Press the key and tap [Set Active].
Allow a few seconds until the label ACTIVE is displayed at the
selected test configuration.
Deleting a test configuration
The instrument is in Loss/Length mode.
I
[A]
1. Press the key and tap the [Test
2. To highlight a test configuration tap it once.
– or –
Use the arrow keys.
[A]
3. Press the key and tap the
4. Tap [Yes] to confirm and permanently delete the
configuration.
The configuration is deleted and removed from the list.
Editing a test configuration
You can not change the name of an existing test configuration.
To change the name copy the configuration, type in the new
name and delete the original configuration.
The instrument is in Loss/Length mode.
I
[A]
1. Press the key and tap the [Test
The available test configurations are displayed.
2. Tap and select an entry.
– or –
6 L /L T
OSS ENGTH EST
D
EFINING A TEST CONFIGURATION
Configuration]
[Remove] button.
Configuration]
O
PERATION
button.
button.
49