Viavi SmartClass MPOLS-84 Operating Manual page 81

D
C
B
A
Test failed
MPOLx-84/85 (P)
– or –
Press the central key.
When the test procedure terminates, the information shown on
the display depends on the current overlay setting:
Overlay
[A]
Press the key and then the
J
the overlay view. Repeat the action until the desired view
appears:
without overlay > with colored edges > with colored edges
and legend > without overlay > ...
A summary of test results is displayed at the upper right of the
screen (following figure is just an example and may vary).
Zone
A Represents the core zone.
It is the area surrounding the core.
B Represents the cladding zone.
It surrounds the majority of the fiber cladding.
C Represents the epoxy ring.
D Represents the ferrule zone.
It identifies a portion of the ferrule near and around the
fiber.
Test result displays and frame colors
Test passed
Fig. 28 Pass/Fail analysis, overlay and freeze view
To return to the live image:
Press the QuickCapture™ key.
J
– or –
[A]
Press the key and tap the
9 P /PCM O
ROBE
[Overlay] button to change
Image frozen
[Live] button.
PERATION
O
PERATION
81