Viavi SmartClass MPOLS-84 Operating Manual page 76

9 P /PCM O
ROBE PERATION
T P5000 D
HE EXTERNAL I IGITAL
76
P
ROBE
levels: low magnification (around 23000 dpi) for overview
inspection of the fiber end face, and high magnification (around
46000 dpi) for detailed inspection of the fiber end face.
The P5000i Digital Probe kit sold with the MPOLS-85 contains
the standard barrel assembly (FBPP-BAP1), standard patch cord
tips, and standard bulkhead tips.
Fig. 26 P5000i Digital Probe components
1 Inspection tip
2 Barrel assembly
3 QuickCapture™ key (see
4 Focus Control
5 Magnification Control key (on both sides)
6 USB 2.0 connector
7 1.83 m (6 ft) coil cable
FBPT series tips for the P5000i
The P5000i Digital Probe uses FBPT series inspection tips to
ensure consistent and accurate inspection for a wide variety of
connectors and applications. These connector-specific and
universal inspection tips are interchangeable, which allows the
P5000i Digital Probe to interface with different types of fiber
connectors.
"Basic settings" on page 77)
MPOLx-84/85 (P)