Viavi SmartClass MPOLS-84 Operating Manual page 54

6 L /L T O
OSS ENGTH EST PERATION
R
EFERENCING
NOTE:
54
2. Tap Next button to start referencing.
The display informs about the progress.
You are requested to disconnect TRC-1 and connect TRC-2
3. Establish a proper connections and tap Next button.
The Test button to run a test is displayed.
4. To proceed see "Running a test" on page
Referencing under high loss deviation
While referencing, the maximum power deviation of the 12 fiber
cabling should be in the range of 0.5 dB. Higher deviation leads
to the high loss deviation warning.
When this warning is shown, the polarity of your reference
55.
MPOLx-84/85 (P)