MPOLx-84/85 (P)
Test-Tool Mode
The Test-Tool Mode is enabled when a Test-Tool project is
activated (for further information see
page
39).
Fig. 8
Dashboard in Test-Tool Mode
Application
Loss / Length
To determine the total amount of loss or attenuation of a
fiber link, the fiber length, and polarity. The selected mode
is shown in purple.
Powermeter
To install and maintain cables and networks with the
broadband power meter.
Source
To edit the laser for maintenance and characterization of
single-mode and multi-mode networks.
Probe
To view and inspect the bulkhead (female) connectors.
PCM (Patch Cord Microscope) (only BN 2326)
To view and inspect the patch cord connector of the fiber.
4 B
O
ASIC
PERATION
M
ENUS AND DISPLAY ELEMENTS
"Managing projects" on
See page
45
68
65
74
74
27