Lens Block; Removal And Installation - Sony DSC-QX10 Service Manual

4-4. LENS BLOCK

4-4-1. Removal and Installation

(1) Ornamental Ring A or Barrier Assy Replacing Method
Removal
1. Turn on the power switch and extend the lens (TELE end).
2. Detach the battery.
3. Pour a solvent such as alcohol to two gaps A of the Ornamental Ring A with tweezers or a fine-tipped
stick as shown below.
4. Turn the Ornamental Ring A clockwise and counterclockwise
to detach it.
A
5. Disengage the four claws and remove the Barrier Assy.
Claws
Installation
1. Fit the four claws while inserting the Barrier Lever into the hole and attach the Barrier Assy.
Claws
2. Peel off the release papers of the Barrier Tapes.
3. Install the Ornamental Ring A and press it lightly.
Barrier Tapes
DSC-QX10
Tweezers
Solvent
Barrier Assy
Claws
Barrier Assy
Barrier
Lever
Claws
Hole
Barrier Assy
Barrier Tapes
Ornamental Ring A
Ornamental Ring A
4-7