Secure The Unit; Safety Precautions; Unintended Machine Movement; Flammable Cleaning Solvents - Danfoss DDC20 Service Manual

Service Manual
DDC20/24 Axial Piston Pumps
Introduction

Safety Precautions

© Danfoss | August 2019

Secure the unit

For major repair, place the unit in a stable position with the shaft pointing downward. It is necessary to
secure the pump while removing and torquing components and fasteners.
Always consider safety precautions before beginning a service procedure. Protect yourself and others
from injury. Take the following general precautions whenever servicing a hydraulic system.

Unintended machine movement

W
Warning
Unintended movement of the machine or mechanism may cause injury to the technician or bystanders.
To protect against unintended movement, secure the machine or disable/disconnect the mechanism
while servicing.

Flammable cleaning solvents

W
Warning
Some cleaning solvents are flammable. To avoid possible fire, do not use cleaning solvents in an area
where a source of ignition may be present.

Fluid under pressure

W
Warning
Escaping hydraulic fluid under pressure can have sufficient force to penetrate your skin causing serious
injury and/or infection. This fluid may also be hot enough to cause burns. Use caution when dealing with
hydraulic fluid under pressure. Relieve pressure in the system before removing hoses, fittings, gauges, or
components. Never use your hand or any other body part to check for leaks in a pressurized line. Seek
medical attention immediately if you are cut by hydraulic fluid.

Personal safety

W
Warning
Protect yourself from injury. Use proper safety equipment, including safety glasses, at all times.
L1120413 | AX00000135en-000401 | 5