1-2
INSTALLATION
Connecting Power to the Curing Chamber
This instrument operates on 220 ± 10% VAC, 50 or 60 Hz, single phase, 15A electrical
current. The instrument is equipped with a power cord and should be connected to an
appropriately rated power source. (The earth ground connection on the rear of the instrument
should be connected to a metal water pipe, a metal rod driven in the ground, or other
appropriate earth ground.)
Note: Remove ALL power connections from the unit before opening the covers or
performing any service operations. The High Current 220 VAC or 120 VAC
voltages inside the unit can KILL