Monogram ZV48R Installation Instructions Manual page 11

1
DETERMINE HOOD, DUCTWORK AND WIRING LOCATIONS
Draw the line to ceiling height.
to the cooking surface.
NOTE:
one or more duct covers.
of hood location
from the desired
installation height.
a straight horizontal
pencil line indicating
the bottom of the
hood.
of the wood support. See illustration.
House Wiring Location
on the right side.
14-1/4"
Electrical
Area
installation height of the hood and the width of the hood.
strain relief.
31-2000856 Rev. 0
Installation Instructions
Installation
Height
Dim. A
14" for 48" Models
8" for 36" Models
5" for 30" Models
Top of Hood
Wood
Support
20"
Bottom of Hood
Dimension A
Cooking Surface
FOR VERTICAL (Straight Up) DUCTING
hood to ceiling or soffit.
on the ceiling or soffit.
FOR DUCTING THROUGH REAR WALL
diameter hole.
Alternate Knockout Locations
relocated from the back to the top of the hood. Remove
original screws.
relief.
9-7/8"
22-1/2"
*House Wiring
Location
*See recessed
location below.
18-1/16" for 48" Models
12-1/16" for 36" Models
9-1/16" for 30" Models
6-1/2"
11