F-Back Signal To Pay System; Clear Paid Signal; Payment System Lock; Foc Programmes - Miele PWM 908 Operating And Installation Instructions

F-back signal to pay system

Setting the feedback signal for the
coin box.
– Factory default: Off
– End of programme
The feedback signal is sent at the
end of the programme.
– Release of the start button
The feedback signal is sent when the
start button is released.
– Start and programme end
The feedback signal is sent at the
start and end of the programme.
– Programme running
The feedback signal is sent con-
stantly between the start and end of
the programme.

Clear paid signal

The "Paid" signal in coin box mode
can be applied until the end of the
programme or discarded if the pro-
gramme is not started after 5 minutes.
Factory default: Off
Supervisor level

Payment system lock

To avoid tampering, a programme lock
can be set up in programme opera-
tion. If the lock is applied, the pro-
gramme is interrupted and payment
credit is lost as soon as the door is
opened.
The time for the lock can be adjusted to
prevent laundry being added.
– Factory default: Off
– As soon as the programme starts
– 1 minute after the start of the pro-
gramme
– 2 minutes after the start of the pro-
gramme
– 3 minutes after the start of the pro-
gramme
– 4 minutes after the start of the pro-
gramme
– 5 minutes after the start of the pro-
gramme

FOC programmes

In coin mode, you can decide which
programmes can be used for free.
Factory default: Off
101