Siemens Cerberus PACE Compact Installation, Mounting page 27

A6V11899867_en--_a
7. Remove the upper and lower door holders.
–
A: take off the washer
– B: unscrew the hinge stud
8. Take the spring out of the hinge.
9. Mount the door holders on the other side of the door:
–
Insert the spring from outside
–
Insert the lever
–
Screw the hinge stud to the lever
10. Place the door with the lower stud in the new position. Don't forget the washer.
11. Pull the upper door lever and move the door into the new position, then release
the lever and make sure that the door is properly inserted and secure. Don't
forget the washer.
12. Mount the earth connection in the new position in the cabinet.
13. Mount the earth connection on the door.
14. Mount the door protection in the new position.
15. Mount the door locks and the door lock covers in the correct position.
Mounting/Installation
Change the cabinet door hinge
4
27 | 122