Intended Use; Warranty And Liability - Endress+Hauser Analytik Jena multi N/C 2100S Operating Manual

Toc/tnb analyzers
Hide thumbs Also See for Analytik Jena multi N/C 2100S:
Table of Contents

Advertisement

multi N/C 2100S
1.3

Intended Use

1.4

Warranty and liability

 Environmental monitoring
The analysis of surface water (e.g. sea water), which often has a low TOC content and
high TIC concentrations as well as high salt content, is possible using special analysis
modes (see section "NPOC analysis according to the NPOC plus method" p. 33).
 Waste and soil
The carbon detection (TC/TOC detection) in solid samples is possible with the extension
of the multi N/C 2100S either by the integrated double furnace solids module or by
HT 1300. Eluates can also be analyzed efficiently due to the possibility of the
simultaneous TOC/TN
detection in liquid samples.
b
 Research and teaching
Due to the many configuration options the multi N/C 2100S is suitable for use in
teaching and research.
The analyzer multi N/C 2100S must only be used for the methods for the detection of
the total carbon and/or the total nitrogen content in aqueous samples as described in
this user manual and in conjunction with an external solids module for the detection of
the total carbon content of solid samples. Any other use is not as intended! Only the
operator is liable for any damages that result from this.
In particular, it is prohibited to use the analyzer to analyze flammable liquids or
substances that could farm explosive mixtures. No concentrated acids may be analyzed
with the analyzer.
The device must only be operated with oxygen, synthetic air or purified air (according
the requirements in section 11.1) as carrier gas.
The operational safety of the analyzer N/C 2100S is only ensured during proper use
according to the information in this user manual. The intended use also includes the
adherence to the installation conditions prescribed by Analytik Jena AG which are
available from the customer service address stated above.
The warranty duration and liability comply with the legal requirements and the
provisions in the general terms and conditions of Analytik Jena AG.
Deviations from the intended use described in this user manual result in limitations of
warranty and liability during a damage event. Damage to wearing parts is not included
in the warranty.
Basic Information
9

Hide quick links:

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Analytik Jena multi N/C 2100S and is the answer not in the manual?

This manual is also suitable for:

Analytik jena multi n/c 2100s duoAnalytik jena multi n/c 2100s pharma

Table of Contents