Requirements For The Operating Personnel - Endress+Hauser Analytik Jena multi N/C 2100S Operating Manual

Safety instructions
2.3

Requirements for the operating personnel

12
The following has to be observed:
 Any manipulation of the safety equipment is prohibited!
In case of an accident manipulations of the safety equipment will be interpreted as
deliberate!
 The operator must only operate the analyzer in a sound and operationally safe
condition. The technical condition must always comply with the legal requirements
and regulations.
 Prior to every use the analyzer must be checked for damage and sound condition.
 Any changes in the analyzer affecting its safety must be reported by the operating
personnel to the operator without delay.
 The equipment components must only be connected to supply cables intended and
designed for this purpose.
 All safety equipment and interlocks must be well accessible and regularly checked for
proper operation.
The analyzer multi N/C 2100S must only be operated by qualified specialist personnel
instructed in the use of the analyzer. The instruction must also include conveying the
content of this user manual and the user manuals of other system components or add-
on equipment.
The analyzer may pose dangers if it is not used by trained personnel, improperly or other
than intended.
Therefore, every person tasked with the operation of the analyzer must have read and
understood this user manual and the user manuals of any additional equipment before
carrying out the respective tasks. This also applies if the respective person has already
worked with or been trained on this kind of analyzer.
It is recommended that the operator have the operating personnel confirm the
knowledge of the content of the user manual in writing. The ultimate responsibility for
the accident-free operation of the analyzer rests with the operator or the specialist
personnel authorized by him.
In addition to the safety at work instructions in this user manual the generally applicable
safety and accident prevention regulations of the respective country of operation must
be observed and adhered to. The operator must ascertain the latest version of these
regulations.
The user manual must be accessible to the operating and service personnel at any time!
The following has to be observed:
 The analyzer must only be commissioned, operated and serviced by trained
personnel instructed in technical safety.
 The operation or servicing of the analyzer by minors or individuals under the
influence of alcohol, drugs or medication is not permitted.
 It must be ensured that only authorized personnel works at the analyzer.
multi N/C 2100S