Fujitsu PRIMEQUEST 480 Installation Planning Manual page 55

2.2.2 LAN and other device connections
Figure 2.3 shows the cable connections for a LAN and other device connections.
Table 2.1 lists the applicable cables.
(1) Cable connection diagram
PRIMEQUEST 400 series
main unit
Fibre Channel card (2G)
Connector type: Duplex
LC connector
Fibre Channel cable connectors are
available in two shape types
(SC and LC).
The type to be used depends on the
cards or devices to be connected.
Prepare a suitable cable after
checking the type of equipment
to be used.
LAN system interface
Gigabit Ethernet card (optical)
Connector type: Duplex SC
Gigabit Ethernet card (electricity)
Connector type: RJ 45
GTHB 1Gbp LAN port
Connector type: RJ 45
The Fibre Channel card and Gigabit
Ethernet card (optical and electricity)
are mounted in IO_units or in
PCI cassettes of PCI_Boxes.
Figure 2.3 Cable connections (LAN and other device connections)
C122-H001-02EN
(1) (2)
*1
(1) (2)
1000Base-SX
(3) (4)
10/100/1000Base-T
(3) (4)
10/100/1000Base-T
2.2 Signal Cable Connections
Fiber channel switch
Connector type:
Duplex SC or Duplex LC
To *1
*2
Disk array device
To *1 or *2 Connector type:
Duplex SC or Duplex LC
Gigabit Ether switch
Connector type:
Duplex SC or Duplex
LC or MTRJ
Gigabit Ether switch
Connector type: RJ45
*3
To *3
*3
*4
Printer,etc.
To *3 or *4
Connector type: RJ45
2-7