Fujitsu PRIMEQUEST 480 Installation Planning Manual page 53

(2) Cable list
When determining the total length of the external interface cable to be connected to
the PRIMEQUEST 480/440, allow for an extra length of cable for pulling out the
units.
NO. Name
(1) Twisted pair cable
(Category 5 UTP cable)
(2) Enhanced category 5 UTP
cable
(3) UPS cable
(4) UPS interface two-branch
connector
(5) UPS interface six-branch
connector
(6) SCSI cable
Y:
C122-H001-02EN
Table 2.1 Cable list (basic interface and peripherals) (1/2)
Order code
TPCBL-B005
TPCBL-B010
TPCBL-B015
TPCBL-B030
TPCBL-B050
TPCBL-B100
TPCBL-C005
TPCBL-C010
TPCBL-C015
TPCBL-C030
TPCBL-C050
TPCBL-C100
DCBL-UPB05
DCBL-UPB15
UPS-B
UPS-B1
DCBL-SCP05
DCBL-SCP10
Supported
Outside
Japan
Japan
Y Y Optional: Select 5, 10, 15,
Y Y
30, 50, or 100 m.
Y Y
This cable is required if
Y Y
100Base-TX or 10Base-T is
Y Y
used. (category 5)
Y Y
RJ45 8 Pin - RJ45 8 Pin
Y Y Optional: Select 5, 10, 15,
Y Y
30, 50, or 100 m.
Y Y
This cable is required if
Y Y
1000Base-T, 100Base-Tx,
Y Y
or 10Base-T is used.
(category 5)
Y Y
RJ45 8 Pin - RJ45 8 Pin
This cable is required for
Y Y
connection to the
Y Y
UPS(F987xx).
Branch connector box that is
used to connect two UPS
(F987xx) units to a single
Y Y
UPC interface. (Comes with
a 2.2 m cable for connecting
the device to the box.)
Branch connector box that is
used to connect six UPS
(F987xx) units to a single
Y Y
UPC interface. (Comes with
a 2.5 m cable for connecting
the device to the box.)
Optional: Select 3 or 10 m.
Y Y
VHDCI 68-pin, male to
Y Y
VHDCI 68-pin, male
2.2 Signal Cable Connections
Length
Packaging
[m (ft)]
10 (33)
15 (49)
30 (98)
50 (164)
100 (328)
10 (33)
15 (49)
30 (98)
50 (164)
100 (328)
15 (49)
2.5 (8)
10 (33)
5 (16)
5 (16)
5 (16)
2.2 (7)
5 (16)
2-5