Grandstream Networks HT-802 Manual page 5

UAD Settings
Navigate to Settings: UAD.
Make sure that the Grandstream UAD is enabled. To check the UAD's status, click the Edit
icon corresponding to your Grandstream phone.
Make sure that Status is set to Active, Auto provisioning is set to No, and DHCP is set to
Yes.
Click the Save button to save changes.
Creating Extension
Creating Extension
Add the Extension
Navigate to Extensions. Click the Add Extension button.
The standard options window will be shown below.
Select the Grandstream phone model from the UAD select box.
Select Location: Local or Remote.
Local is for all Extensions registered on the LAN and Remote is for all Extensions
registered from remote networks, WAN, Internet etc.
Click the Next step button.
Extension Values
Enter values into the required field text boxes.
REQUIRED FIELDS:
Name
Enter a name for the Extension being created. Example: John Smith.
E-mail
Enter the e-mail address associated with this Extension. This e-mail address will receive
all system notification messages. Example: john.smith@bicomsystems.com.
Click the Save button.
1. Log in to your device's web administration interface.
Open a new browser window and enter the ATA IP address, for example 192.168.1.57