Requirements; Identifying Phone Model; Phone Firmware - Grandstream Networks HT-802 Manual

Hide thumbs Also See for HT-802:

Table of Contents

This Configuration Guide is written as a general guide on how to configure the Grandstream

device model HT-802 to work with PBXware 5.3.6.

Requirements

To start and successfully complete registration of your Grandstream device you need to know

which phone model to set up.

On the back of each Grandstream phone, there is model information that you should check.

Although various phone models can have exactly the same requirements and installation

procedures, they can also have significantly different requirements and installation procedures,

so that is why it is important to know the model you own which results in you setting up the

device successfully.

Make sure that your device is loaded with an appropriate firmware version, 1.0.17.5.

To find out the firmware version of your Grandstream device model, open a new browser

window and enter your phone's IP address in order to access the phone's web administration

interface login screen. Example: http://192.168.1.22.

Table of Contents