administration interface login screen. Example: http://192.168.1.22.
Log in to the web administration interface with your password. Please note that the factory
default password is admin.
Click the Basic Settings tab.
In the Reset Type field, select Full Reset.
Click the Reset button.
Wait some time for a device to reboot.
NOTE:
Do not unplug or remove power from the device while it is updating firmware and
configuration.
Registering phone
This section describes how to register the phone using Manual configuration or Auto
provisioning.
The following topics are covered:
Manual Configuration
Auto Provisioning
Manual Configuration
This section describes how to set UAD settings, create the PBXware Extension, and register a
phone.
The following topics are covered:
UAD Settings
Creating Extension
Registering Phone
UAD Settings
UAD settings
Log in to the PBXware web administration interface.
Open a new browser window and enter the IP address in order to access the PBXware web
administration login screen. Example: http://192.168.1.10
Log in to PBXware with your e-mail address and password.