Connecting A Personal Computer (Bmz-K7D Only); Installing The Software On Your Pc - Aiwa BMZ-K5D Operating Instructions Manual

To stop recording
Press x.
Notes
• You cannot listen to other sources while recording.
• When you press REC PAUSE/START in step 3, the
surround effect may automatically change (see
"Selecting the surround effect" on page 55).
Tips
• If you want to record from the reverse side, press
FUNCTION repeatedly to select TAPE function.
And set the tape direction to REVERSE, then start
recording.
• When you record on both sides, be sure to start from
the FWD side. If you start from the reverse side,
recording stops at the end of the reverse side.
• For recording from the tuner:
If noise is heard while recording from the tuner,
move the respective antenna to reduce the noise.
• When there is severe noise, set "DVD PWR OFF" by
DVD power manage function (page 41).
CONNECTING A PERSONAL
COMPUTER (BMZ-K7D only)
Installing the Software on
your PC
Before Starting the Installation
Before installing the software on the supplied
BMZ USB Driver CD, check to be sure that your
system meets the following system
requirements.
PC
IBM PC/AT compatible
Free hard disk space: At least 10
MB
USB port
CD-ROM drive
Recommended CPU: MMX
Technology Pentium processor,
266 MHz or greater
Operating Windows 98 Second Edition,
System
Windows 2000 Professional,
Windows Millennium Edition, or
Windows XP Professional/Home
Edition
The software is not guaranteed to function
in the following system environments.
• Operating systems other than Windows, including
the Macintosh
• Versions of Windows XP other than Professional or
Home Edition
• Version of Windows 2000 other than Professional
• Versions of Windows 98 other than Second Edition
• Windows NT, Windows 95
• Systems in which a preinstalled Windows 3.1/95/98
operating system has been upgraded
• Connecting by way of the USB hub.
Notes
• The software is not guaranteed to function on all
systems that meet the system requirements.
• This USB Driver installer and Winamp3 can be used
only with an English-language system. If used in a
different language environment, it may be not
correctly displayed.
continued
GB
47