Installing The Usb Driver - Aiwa BMZ-K5D Operating Instructions Manual

• IBM and PC/AT are registered trademarks of
International Business Machines Corporation in the
US.
• MMX and Pentium are trademarks or registered
trademarks of Intel Corporation.
• Microsoft and Windows are trademarks of the US
Microsoft Corporation registered in the US and other
countries.
• The USB port of this unit is joint development of Sony
Corporation and Micronas Semiconductor Holding
AG.
• Other system names and product names mentioned
herein are generally registered trademarks or
trademarks of their respective owners. However, the
®
and marks are not used in this Installation Guide.
Tip
When you connect a personal computer, see also "Set
up Manual" in the supplied CD-ROM.
GB
48

Installing the USB Driver

First, install the USB driver. You must log in to
Windows XP or Windows 2000 as a user with
Administrator privileges in order to install the
software.
1
Turn on the PC and start Windows.
2
Turn on the unit.
3
Insert the supplied BMZ USB Driver CD
into the CD-ROM drive of your PC.
The installer starts automatically, and the
TM
Installation Guide screen appears.
If the installer does not start automatically,
locate the CD-ROM drive of your PC in the
My Computer folder, and double click
AIWAMENU on the CD-ROM.
4
Click "BMZ USB Driver."
5
Select a display language to be used by
the installer, and click "OK."
The explanations of step 5 and following
assume that you have chosen English as the
display language.
6
Read the license agreement, and click
"I Agree."
A message appears asking you to connect a
USB cable.
7
Connect this unit to the PC with a USB
cable.
USB cable (supplied)
Type A
8
Press FUNCTION repeatedly until
"USB" appears in the display window
of this unit.
Type B
Front panel
of the unit
PC