Tape - Play; Loading A Tape; Playing A Tape - Aiwa BMZ-K5D Operating Instructions Manual

Tape – Play

Loading a tape

1
Press Z PUSH EJECT to open the
cassette holder.
2
Insert the tape.
Insert with the exposed side down, and
press Z PUSH EJECT to close the cassette
holder.

Playing a tape

You can use TYPE I (normal) tape.
1
Load a tape.
2
Press FUNCTION repeatedly to select
the tape function.
3
Select a reverse mode.
See "To select a reverse mode."
4
Press nN to start play.
Reading the indicators
B
and TAPE FW: The front side is being
played (forward).
b and TAPE RV: The back side is being
played (reverse).
To select a reverse mode
1
Press MODE on the main unit repeatedly until
"REV MODE" is displayed.
2
Within 6 seconds, press ENTER.
3
Turn MULTI JOG to select the reverse mode.
The mode changes as follows;
"REV OFF": Plays one side only.
"REV ": Plays the front side and then the rear side
once.
"REV ": Plays both sides repeatedly.
Other operations
To Do this
Press x.
Stop play
Pause Press X. Press X (or
resume play.
Press m or M on the remote or
Fast-forward or
rewind ./m or M/> on the unit.
Press Z PUSH EJECT on the unit.
Remove a tape
nN
Change the Press
playback side
To reset the tape counter
Press x in stop mode, and the tape counter in the
display is reset to "0000."
Opening and closing the cassette holder will also
reset the tape counter.
nN
) to
in playback mode.
45
GB