Tuner; Presetting Radio Stations - Aiwa BMZ-K5D Operating Instructions Manual

Tuner

Presetting radio stations

You can preset up to 32 stations. You can then
tune in any of those stations simply by selecting
the corresponding preset number.
Automatic tuning preset
You can automatically tune in all of the stations
that can be received in your area and then store
the radio frequency of the desired stations.
1
Press TUNER/BAND repeatedly to
select "FM" or "AM."
2
Press and hold TUNING –/m or
TUNING +/M (or press and hold ./
m or M/> on the unit) until the
frequency indication starts to change,
then release it.
The frequency changes as the system scans
for a station. Scanning stops automatically
when a station is tuned in. At that time,
"TUNED" and
program) appear.
If "TUNED" does not appear and the
scanning does not stop.
Set the frequency of the desired radio
station as described in steps 1 through 3 of
"Manual tuning preset."
GB
40
(for a FM stereo
3
Press ENTER or X.
A preset number appears.
Preset number
4
Repeat steps 1 through 3 to store other
stations.
Manual tuning preset
You can manually tune in and store the radio
frequency of the desired stations.
1
Press TUNER/BAND repeatedly to
select "FM" or "AM."
2
Press TUNING –/m or TUNING +/M
repeatedly to tune in the desired
station.
3
Press ENTER or X.
A preset number appears.
4
Repeat steps 1 through 3 to store other
stations.
Other Operation
To Do this
Tune in a station Follow the procedure described
with a weak signal in "Manual tuning preset."
To cancel a preset station
1
Tune in the preset station you want to
cancel, then press CLEAR or x.
2
Within 6 seconds, press ENTER.
Tips
• On the unit, press x. Within 6 seconds, press X or
ENTER.
• Preset station numbers are automatically sorted when
a preset station is canceled.