Sound Adjustment; Adjusting The Sound - Aiwa BMZ-K5D Operating Instructions Manual

Sound Adjustment

A justing the sound
D
You can reinforce the bass and create a more
powerful sound.
BASS
Emphasizes low frequencies for a powerful
sound.
Turn the BASS dial on the unit to adjust from
–4 to +4.
Note
If the sound becomes distorted with higher levels of
bass, turn the bass level down.
Tips
• You cannot adjust the Bass setting when i-Bass is
activated.
• You can also adjust the sound by using the MULTI
JOG dial and TREBLE/MIDDLE dial on the unit
(page 14).
TREBLE/MIDDLE
TREBLE enhances high frequency for sound
clarity and MIDDLE enhances mid frequency
for presence.
Turn the TREBLE/MIDDLE dial on the unit to
adjust from –4 to +4.
Tip
You can also adjust BASS, MIDDLE, and TREBLE by
the AMP MENU button. Press AMP MENU
repeatedly to select BASS, MIDDLE or TREBLE.
>
Press . or
press ENTER.
i-Bass
Produces a rich and clear low-frequency sound
besides BASS effect.
1
Press i-Bass on the unit.
"I-BASS ON" is displayed.
2
Turn the BASS dial on the unit to adjust
i-Bass from +1 to +4 and MAX.
GB
54
to set the level you want, and then
Select an i-Bass frequency
1
Press i-Bass on the unit to turn i-Bass
on.
2
Press MODE on the unit repeatedly
until "FREQ" is displayed and then
press ENTER.
3
Within 6 seconds, turn the MULTI JOG
dial on the unit to select one of the
three frequency ranges and then press
ENTER.
- FREQ 1: Low range
- FREQ 2: Mid range
- FREQ 3: High range
After step3, adjust the i-Bass level by
turning BASS if needed.
To cancel i-Bass
Press i-Bass on the unit to select "I-BASS OFF."
Graphic equalizer
Selects a sound equalization curve to match the
music type.
Press AMP MENU repeatedly to select GEQ
MENU.
> to select the setting you
Then press
. or
want.
There are seven kinds of GEQ MENU:
HEAVY, VOCAL, SALSA, TECHNO, HIP
HOP, USER and GEQ OFF.
Tip
USER is a customized curve (see "Setting a curve
manually").
To cancel equalization, select "GEQ OFF."
Setting a curve manually
1
Turn TREBLE/MIDDLE and BASS on
the unit to adjust the sound level.
On the remote, press AMP MENU
repeatedly to select "BASS," "MIDDLE"
and "TREBLE," and then press
to adjust the level.
2
Hold down ENTER for 2 seconds.
3
Within 4 seconds, press ENTER.
Notes
• You cannot set the equalization curve when "I-BASS
ON" is selected.
• Licensed by BBE Sound, Inc. under USP4638258,
5510752 and 5736897.
>
. or