Installing Winamp3; Installing The Winamp3 Bmz Plug-In - Aiwa BMZ-K5D Operating Instructions Manual

Installing Winamp3

After you finish installing the USB driver, install
Winamp3.
1
Click "Winamp3" on the Installation
Guide screen.
2
Read the license agreement, and click
"I Agree."
3
Complete the installation by following
the instructions on the screen.
If the "Winamp Setup: User information"
screen appears, click "Later."
When the installation finishes, the message
"Winamp Setup: Winamp successfully
installed" appears.
4
Click "Run Winamp."
Winamp starts.
Note
Winamp3 is free software. Any version of Winamp
other than Version 3.0 is not guaranteed to function
with this unit. Even if you already have Winamp
installed on your PC, it is recommended that you install
it again from the supplied CD-ROM.
GB
50
Installing the Winamp3
BMZ Plug-in
Finally, after you finish installing Winamp3,
install the Winamp3 Plug-in.
1
Click "Winamp3 BMZ Plug-in" on the
Installation Guide screen.
2
Select a display language to be used by
the installer, and click "OK."
The installer will use that language in the
following steps.
3
Read the license agreement, and click
"I Agree."
4
When a message appears to inform
you that the installation has finished,
click "Close."
You are returned to the Installation Guide
screen. Click "EXIT" and remove the CD-
ROM from the CD-ROM drive of your PC.