Setting The Clock; Changing The Level Meter - Aiwa BMZ-K5D Operating Instructions Manual

Setting the clock

1
Press CLOCK/TIMER SET on the
remote.
If you have already set the clock, see "To
adjust the clock."
2
Press or
. >
press ENTER.
3
Press or
. >
Each press changes the time in 1-minute
steps.
4
Press ENTER.
The time display stops flashing and the
clock starts from 00 seconds.
Tips
• MULTI JOG can also be used as well as . or
>.
• You can display the clock for 6 seconds by backlight
by pressing DISPLAY when the system is turned off.
To adjust the clock
1
Press CLOCK/TIMER SET on the remote.
2
Press . or > repeatedly to display "CLOCK"
and then press ENTER.
3
Carry out steps 2 to 4 described in "Setting the
clock" to set the time.
To display the time while the power is on
Press DISPLAY on the remote repeatedly. The clock
display appears in the display for 6 seconds.
If "- -:- -" appears when the unit is turned off
There has been a power interruption. Reset the clock.
to set the hour, then
to set the minute.

Changing the LEVEL meter

You can change the LEVEL meter.
1
Press MODE on the unit repeatedly
until "PATTERN" is displayed, and
then press ENTER.
2
Within 6 seconds, turn the MULTI JOG
dial on the unit to select one of the
three LEVEL meter (PATTERN 1,2 and
3).
GB
13