Table of Contents
Advertisement
OTHER CONNECTIONS
CONNECTING OPTIONAL
EQUIPMENT
CONNECTING TO AUX JACKS
players, VCRs, TVs, etc.).
jack.
for details.
When connecting a turntable
Use an Aiwa turnable equipped with a built-in equalizer amplifier.
LISTENING TO EXTERNAL SOURCES
To play equipment connected to the AUX jacks, press the AUX
button and start play. "AUX" appears on the display.
15 ENGLISH
CARE AND MAINTENANCE
Occasional care and maintenance of the unit and the software
are needed to optimize the performance of your unit.
To clean the cabinet
Use a soft and dry cloth.
If the surfaces are extremely dirty, use a soft cloth lightly
moistened with mild detergent solution.
Do not use strong
solvents, such as alcohol, benzine or thinner as these could
damage the finish of the unit.
To clean the heads and tape paths
After every 10 hours of use, clean the heads and tape paths
with a head cleaning cassette or cotton swab moistened with
cleaning fluid or denatured alcohol. (These cleaning kits are
commercially available.)
When cleaning with a cotton swab, wipe the recording/playback
head, erasure head, capstan, and pinchroller.
Cotton swab
Erasure head
Recording/
Playback head
Capstan
After cleaning the heads and tape paths with a liquid head
cleaning cassette or a moistened swab, wait until ihe cleaned
parts are completely dry before inserting the tapes.
Care of discs
e When a disc becomes dirty, wipe the disc from the center out
with a cleaning cloth.
¢ After playing a disc, store the disc in its case. Do rot leave the
disc in places that are hot or humid.
Care of tapes
¢ Store tapes in their cases after use.
¢ Do not leave tapes near magnets, motors, televijon sets, or :
any source of magnetism.
This will downgrade
the sound
quality and cause noise.
* Do not expose tapes to direct sunlight, or leave tleem in a car
parked in direct sunlight.
Advertisement
Table of Contents
