Tape - Play; Loading A Tape; Playing A Tape - Aiwa JAX-N33 Operating Instructions Manual

Tape – Play

Loading a tape

Use buttons on the unit for the operation.
1
Press TAPE A/B repeatedly to select
deck A or B.
2
Press PUSH Z.
3
Load a recorded/recordable tape in
deck A or B with the side you want to
play/record facing forward.
With the side
you want to
play/record
facing
forward.
18 GB

Playing a tape

You can use TYPE I (normal) tape.
For JAX-N88/N77/N66/N33/PK88/
PK77/PK66
1
Load a tape.
2
When you load a tape in deck B, press
PLAY MODE repeatedly to select "g"
to play one side. Select "j"
both sides.
To play both decks in succession, press
PLAY MODE repeatedly until "RELAY"
2)
(Relay Play) appears in the display.
3
Press N (or hH on the unit).
The tape starts playing. Press the button
again to play the reverse side.
1)
The tape deck stops automatically after repeating
the sequence five times.
2)
Relay Play always follows this cyclic sequence up
to five times, then stops:
Deck A (front side) t Deck B (front side) t
Deck B (reverse side)
For other models
1
Load a tape.
To play both decks in succession, press
PLAY MODE repeatedly until "RELAY"
(Relay Play)* appears in the display.
2
Press N.
The tape starts playing.
* After the playback of the front side of deck A, deck
B plays the front side, then stops.
1)
to play